GM Camaro/Firebird 1993-1998 Repair Guide

Reverse Lockout Solenoid

Print

REMOVAL & INSTALLATION



6-Speed Transmission
  1. Disconnect the negative battery cable.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Detach the electrical connector from the reverse lockout solenoid.
  6.  
  7. Remove the reverse lockout attaching bolt, then and remove the lockout assembly.
  8.  
  9. Remove the solenoid from the reverse lockout assembly.
  10.  
  11. Installation is the reverse of the removal procedure. Tighten the lockout solenoid to 30 ft. lbs. (41 Nm) and the lockout assembly bolt to 13 ft. lbs. (18 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo