GM Caprice 1990-1993 Repair Guide

Ignition Module

Print

REMOVAL AND INSTALLATION



  1. Disconnect wires from cap.
  2.  
  3. Remove distributor cap from distributor.
  4.  
  5. Remove the two module attaching screws and capacitor attaching screw. Lift module, capacitor and harness assembly from base.
  6.  
  7. Disconnect wiring harness and capacitor assembly.
  8.  
  9. To install, apply silicone lubricant on housing under module.
  10.  
  11. Connect wiring harness and capacitor assembly.
  12.  
  13. Install module and attaching screws.
  14.  
  15. Install the distributor cap and wires.
  16.  

 
label.common.footer.alt.autozoneLogo