GM Caprice 1990-1993 Repair Guide

Stabilizer Shaft

Print

REMOVAL & INSTALLATION



  1. Raise the car and support the car on jackstands.
  2.  
  3. Remove the link bolt, nut, grommet, spacer and retainers.
  4.  
  5. Remove the insulators and brackets.
  6.  
  7. Remove the stabilizer shaft.
  8.  
  9. To install, position the stabilizer shaft into place and install the insulators and brackets.
  10.  
  11. Hold the stabilizer shaft approximately 55mm from the bottom of the side rail and torque the bracket bolts to 37 ft. lbs. (50 Nm).
  12.  
  13. Install the bolt, nut, grommets, spacer and retainers.
  14.  
  15. Lower the car.
  16.  

 
label.common.footer.alt.autozoneLogo