GM Caprice 1990-1993 Repair Guide

Dimmer Switch

Print

REMOVAL & INSTALLATION



If equipped with an air bag system, make certain to follow the recommended disarming procedure before, and rearming procedure after, repairs.

  1. Disconnect the negative battery cable.
  2.  
  3. The dimmer switch is attached to the lower steering column jacket. Disconnect all electrical connections from the switch.
  4.  
  5. Remove the nut and screw that attach the switch to the steering column jacket and remove the switch.
  6.  
  7. Install the dimmer switch and depress it slightly to insert a 3 / 32 inch drill. Force the switch up to remove lash, then tighten screw and nut to 4.0 ft. lbs.
  8.  

 
label.common.footer.alt.autozoneLogo