GM Caprice 1990-1993 Repair Guide

Wiper Linkage

Print

REMOVAL & INSTALLATION



  1. Remove the wiper arms and blades. Remove the lower windshield reveal molding, cowl vent screen and access hole cover as required.
  2.  
  3. Disconnect the transmission drive link to the motor crank arm.
  4.  
  5. Remove the transmission-to-body attaching screws from both the right and left sides of the car.
  6.  
  7. Guide the transmissions and linkage out through the cowl opening.
  8.  
  9. To install, guide the transmissions and linkage in through the cowl opening.
  10.  
  11. Install the transmission-to-body attaching screws to both the right and left sides of the car.
  12.  
  13. Connect the drive link to the arm.
  14.  
  15. Install the access hole cover, cowl vent screen and lower windshield reveal molding, as required.
  16.  
  17. Install the wiper arms and blades.
  18.  

 
label.common.footer.alt.autozoneLogo