GM Cavalier/Sunbird/Skyhawk/Firenza 1982-1994

Fluid Level Sensor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Detach the electrical connection from the fluid level sensor.
  4.  
  5. Remove the fluid level sensor, using needle-nose pliers to compress the switch locking tabs at the inboard side of the master cylinder.
  6.  

To install:
  1. Insert the fluid level sensor unit until the locking tabs snap in place.
  2.  
  3. Attach the sensor electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo