GM Cavalier/Sunbird/Skyhawk/Firenza 1982-1994

Back-up Light Switch

Print

REMOVAL & INSTALLATION



1982-87 Vehicles

See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the console, then replace the switch at the side of the shifter.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Back-up lamp switch removal and installation - 1982-87 vehicles

1988-94 Vehicles

See Figures 2, 3 and 4

  1. Disconnect the negative battery cable.
  2.  
  3. Detach the back-up lamp connector.
  4.  
  5. Unscrew then remove the back-up lamp switch assembly.
  6.  



Click image to see an enlarged view

Fig. Fig. 2: Back-up lamp switch installation - HM-282 and 5TM40 5-speed manual transaxles



Click image to see an enlarged view

Fig. Fig. 3: Back-up lamp switch location - Isuzu 5-speed manual transaxle



Click image to see an enlarged view

Fig. Fig. 4: Removal and installation of the back-up lamp switch - MK7/MT5 5-speed manual transaxles

To install:
  1. Install the switch with pipe sealant and tighten to 80-84 inch lbs. (9-9.4 Nm).
  2.  
  3. Attach the switch electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo