EXCEPT 1985-86 2.0L (OHV) ENGINES
- Remove the fuel pump fuse from the fuse block.
- Crank the engine. The engine will start and run until the fuel supply in the pipes is gone. Crank the engine again for 3 seconds making sure it is out of fuel.
- Turn the ignition off and replace the fuse.
1985-86 2.0L (OHV)
The TBI injection systems used on the 1985-86 engines contain a constant bleed feature in the pressure regulator that relieves pressure any time the engine is turned off. Therefore, no special relieve procedure is required, however, a small amount of fuel may be released when the fuel line is disconnected.