GM Cavalier/Sunbird/Skyhawk/Firenza 1982-1994

Oil Pressure Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Drain the engine oil, as outlined in Routine Maintenance of this repair guide.
  4.  
  5. Detach the oil pressure switch electrical connector.
  6.  
  7. Remove the switch from the cylinder block.
  8.  

To install:
  1. Coat the switch with sealant, then install in the cylinder block.
  2.  
  3. Attach the oil pressure switch electrical connector.
  4.  
  5. Fill the engine with oil.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo