GM Cavalier/Sunbird/Skyhawk/Firenza 1982-1994

Rear Window Wiper Motor

Print

REMOVAL & INSTALLATION



  1. Turn the ignition switch OFF .
  2.  
  3. Pull the wiper arm from the pivot shaft.
  4.  
  5. Remove the pivot shaft nut and spacers.
  6.  
  7. Open the tailgate and remove the inner trim panel.
  8.  
  9. Remove the license plate housing.
  10.  
  11. Detach the license plate light wiring.
  12.  
  13. Disconnect the wiper motor wiring.
  14.  
  15. Remove the linkage arm locking clip, pry off the arm and remove the linkage.
  16.  
  17. Unfasten the motor and bracket attaching screws and remove the motor.
  18.  
  19. Installation is the reverse of removal.
  20.  

 
label.common.footer.alt.autozoneLogo