GM Cavalier/Sunbird/Skyhawk/Firenza 1982-1994

Wiper Linkage

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the wiper arms.
  2.  
  3. Remove the shroud top vent grille.
  4.  
  5. Loosen (but do not remove) the drive link-to-crank arm attaching nuts.
  6.  
  7. Unscrew the linkage-to-cowl panel retaining screws and remove the linkage.
  8.  
  9. Installation is the reverse of removal. Tighten the attaching screws and nuts to 64 inch lbs. (7 Nm).
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Removing the windshield wiper linkage

 
label.common.footer.alt.autozoneLogo