GM Cavalier/Sunfire 1995-2000 Repair Guide

Radio Receiver/Tape Player/CD Player

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disable the SIR system, as outlined earlier in this section.
  2.  
  3. If not done already, disconnect the negative battery cable.
  4.  
  5. For the Cavalier, remove the instrument panel cluster trim plate.
  6.  
  7. For the Sunfire, remove the accessory trim plate.
  8.  
  9. Unfasten the retaining screws, then pull the radio assembly forward. Detach the electrical and antenna lead connections, then remove the assembly from the vehicle.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Radio assembly mounting-1995 Cavalier shown



Click image to see an enlarged view

Fig. Fig. 2: View of the radio mounting-1995 Sunfire shown

To install:
  1. Attach the electrical and antenna lead connections to the radio assembly.
  2.  
  3. Position the assembly, then secure with the retaining screws.
  4.  
  5. For the Cavalier, install the instrument panel cluster trim plate.
  6.  
  7. For the Sunfire, install the accessory trim plate.
  8.  
  9. Connect the negative battery cable,
  10.  
  11. Enable the SIR system, as outlined earlier in this section.
  12.  

 
label.common.footer.alt.autozoneLogo