GM Cavalier/Sunfire 1995-2000 Repair Guide

Outside Mirrors

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3



Click image to see an enlarged view

Fig. Fig. 1: Remove the retaining screw for the upper trim panel and ...



Click image to see an enlarged view

Fig. Fig. 2: ... remove the panel from the door



Click image to see an enlarged view

Fig. Fig. 3: Outside mirror removal and installation-1995 power and manual mirrors shown

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the door upper trim panel.
  4.  
  5. Remove the absorber from the door covering the mirror retaining nuts.
  6.  
  7. If equipped with power mirrors, detach the electrical connector.
  8.  
  9. Remove the mirror retaining nuts from the door while supporting the mirror.
  10.  
  11. Remove the mirror assembly.
  12.  

To install:
  1. Position the mirror and hand tighten the retaining nuts.
  2.  
  3. Tighten the retaining nuts to 50 inch lbs. (6 Nm).
  4.  
  5. If equipped with power mirrors, attach the electrical connector.
  6.  
  7. Install the absorber onto the door.
  8.  
  9. Install the door upper trim panel.
  10.  
  11. Disconnect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo