GM Cavalier/Sunfire 1995-2000 Repair Guide

Blower Motor

Print

REMOVAL & INSTALLATION



See Figures 1 and 2



Click image to see an enlarged view

Fig. Fig. 1: Remove the sound insulator from underneath the passenger side of the instrument panel



Click image to see an enlarged view

Fig. Fig. 2: Remove the retaining bolts for the blower motor assembly

The blower motor and fan are serviced as an assembly only.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the passenger side sound insulator.
  4.  
  5. Detach the electrical connections from the blower motor.
  6.  
  7. Remove the blower motor retaining screws, then remove blower motor and fan assembly.
  8.  

To install:
  1. Install blower motor and fan assembly, then secure using the retaining screws.
  2.  
  3. If equipped, connect the blower motor cooling tube.
  4.  
  5. Attach the electrical connections to the blower motor.
  6.  
  7. Install the right side sound insulator.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo