GM Cavalier/Sunfire 1995-2000 Repair Guide

Instrument Cluster

Print

REMOVAL & INSTALLATION



Cavalier

See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Disable the SIR system, as outlined earlier in this section.
  4.  
  5. Remove the instrument panel cluster trim plate.
  6.  
  7. Unfasten the screws from the top of the cluster, then pull the cluster rearward to remove.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Instrument cluster mounting-Cavalier

To install:
  1. Position the cluster to the instrument panel, then fasten the screws at the top of the cluster.
  2.  
  3. Install the instrument panel trim plate.
  4.  
  5. Connect the negative battery cable.
  6.  
  7. Enable the SIR system.
  8.  

Sunfire

See Figure 2

  1. Disconnect the negative battery cable.
  2.  
  3. Disable the SIR system, as outlined earlier in this section.
  4.  
  5. Remove the instrument panel trim pad.
  6.  
  7. Unfasten the screws from the top of the cluster, then pull the cluster rearward to remove.
  8.  



Click image to see an enlarged view

Fig. Fig. 2: Instrument cluster mounting-Sunfire

To install:
  1. Position the cluster to the instrument panel, then fasten the screws at the top of the cluster.
  2.  
  3. Install the instrument panel trim pad.
  4.  
  5. Connect the negative battery cable.
  6.  
  7. Enable the SIR system.
  8.  

 
label.common.footer.alt.autozoneLogo