GM Cavalier/Sunfire 1995-2000 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: The back-up lamp switch mounting-manual transaxle

  1. Disconnect the negative battery cable.
  2.  
  3. Detach the back-up lamp connector.
  4.  
  5. Unscrew then remove the back-up lamp switch assembly.
  6.  

To install:
  1. Coat the threads of the back-up lamp switch with a suitable thread locking compound.
  2.  
  3. Install the switch and tighten to 24 ft. lbs. (33 Nm).
  4.  
  5. Attach the switch electrical connector.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo