GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Brake Control Solenoid Assembly

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Unplug the solenoid electrical connector.
  4.  
  5. Remove the Torx® head bolt.
  6.  
  7. Remove the solenoid assembly.
  8.  

To install:
  1. Lubricate the O-rings on the new solenoid with clean brake fluid.
  2.  
  3. Position the solenoid so the connectors face each other.
  4.  
  5. Press down firmly by hand until the solenoid assembly flange seats on the modulator assembly.
  6.  
  7. Install the Torx® head bolts. Tighten to 39 inch lbs. (5 Nm).
  8.  
  9. Engage the solenoid electrical connector.
  10.  
  11. Properly bleed the brake system.
  12.  
  13. Connect the negative battery cable.
  14.  

 
label.common.footer.alt.autozoneLogo