GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Blower Motor Resistor

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disconnect the negative battery cable.
  2.  
  3. Unplug the electrical connector at the resistor.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: Unplug the electrical connector from the resistor

  1. Remove the resistor attaching screws.
  2.  
  3. Remove the resistor from the evaporator case.
  4.  



Click image to see an enlarged view

Fig. Fig. 2: After removing the attaching screws, pull the resistor from the case

To install:
  1. Position the resistor in the evaporator case. Install the attaching screws.
  2.  
  3. Engage the electrical connector.
  4.  
  5. Connect the negative battery cable. Tighten the cable bolt to 11 ft. lbs. (15 Nm).
  6.  
  7. Reset the radio, clock and any other applicable electronic devices.
  8.  

 
label.common.footer.alt.autozoneLogo