GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Manual Control Head

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the hush panel, as required.
  4.  
  5. Remove the instrument panel trim plate.
  6.  
  7. Remove the control head attaching screws and pull the control head out.
  8.  
  9. Unplug the electrical and vacuum connectors at the back of the control head. Disconnect the temperature control cable.
  10.  
  11. Remove the control head.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: A/C manual control head

To install:
  1. Position the control head near the mounting location. Engage the electrical and vacuum connectors and cables to the back of the control head. Connect the temperature control cable.
  2.  
  3. Install the control head and attaching screws.
  4.  
  5. Install the instrument panel trim plate.
  6.  
  7. Install the hush panel, if removed.
  8.  
  9. Connect the negative battery cable. Tighten the cable bolt to 11 ft. lbs. (15 Nm).
  10.  
  11. Reset the radio, clock and any other applicable electronic devices.
  12.  

 
label.common.footer.alt.autozoneLogo