GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Fluid Level Sensor

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Unplug the electrical connection on the fluid level sensor located on the master cylinder.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: The fluid level sensor is located on the side of the master cylinder housing

  1. Remove the level sensor by using a pair of needle nose pliers to compress the locking tabs on the inboard side of the master cylinder.
  2.  



Click image to see an enlarged view

Fig. Fig. 2: Use a pair of needlenose pliers to compress the switches locking tabs

To install:
  1. Insert the fluid level sensor into position until the locking tabs snap into place.
  2.  
  3. Install the electrical connection to the sensor.
  4.  

 
label.common.footer.alt.autozoneLogo