Instead of the traditional expanding brakes that press outward against a circular drum, disc brake systems utilize a cast iron disc with brake pads positioned on either side of it. Braking effect is achieved in a manner similar to the way you would squeeze a spinning phonograph record between your fingers. The disc (rotor) is a one-piece casting with cooling fins between the two braking surfaces. This enables air to circulate between the braking surfaces making them less sensitive to heat buildup and more resistant to fade. Dirt and water do not affect braking action since contaminants are thrown off by the centrifugal action of the rotor or scraped off by the pads. Also, the equal clamp action of the two brake pads tends to ensure uniform, straightline stops. All disc brakes are self-adjusting.