GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Control Cables

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the temperature control assembly from the dash.
  4.  
  5. Remove the lower instrument panel sound insulator.
  6.  
  7. Tag and disconnect the cable(s) at the module and control.
  8.  
  9. Remove the cables.
  10.  

To install:
  1. Attach the cables in there proper locations, make sure any retaining clips are seated properly.
  2.  
  3. Install the lower instrument panel sound insulator.
  4.  
  5. Install the control assembly.
  6.  
  7. Adjust the cables as needed. Vehicles with sliding clips, proceed as follows:
    1. Place the control lever in the Cold position.
    2.  
    3. Place the clip of the cable on the heater case temperature door post.
    4.  
    5. Push the control head lever towards the Hot, until the temperature door seats and the spring back is out of the cable and control.
    6.  

  8.  
  9. Connect the negative battery cable, tighten the cable bolt to 11 ft. lbs. (15 Nm).
  10.  
  11. Reset the radio, clock and any other electronic devises in need.
  12.  

 
label.common.footer.alt.autozoneLogo