GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



  1. Working from underneath the dashboard, locate the back-up light switch on the steering column and remove the wiring harness.
  2.  
  3. Pull downward and remove the switch from the steering column.
  4.  

To install:
  1. Apply the parking brake and place the gear select lever in N .
  2.  
  3. Align the actuator on the switch with the hole in the shift tube.
  4.  
  5. Position the rearward portion of the switch (connector side) to fit into the cutout in the lower jacket.
  6.  
  7. Push up on the front of the switch, the two tangs on the housing back will snap into place in the rectangular holes in the jacket.
  8.  
  9. Adjust the switch by moving the gear selector to P . The main housing and the back should ratchet, providing proper switch adjustment.
  10.  

 
label.common.footer.alt.autozoneLogo