GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Seat Belt Systems

Print

REMOVAL & INSTALLATION



Floor Mount
  1. Remove the cover from the anchor plate.
  2.  
  3. Remove the cover from the floor mounted retractor assembly.
  4.  
  5. Disconnect wiring from assembly, as needed.
  6.  
  7. Remove assembly.
  8.  

To install:
  1. Install the assembly. Tighten the retaining bolts to 31 ft. lbs. (42 Nm).
  2.  
  3. Connect the electrical wiring to the assembly.
  4.  
  5. Attach the cover to the floor mounted retractor assembly.
  6.  
  7. Attach the cover to the anchor plate.
  8.  

Outboard Belts and Retractors

See Figure 1

  1. Remove door trim panel.
  2.  
  3. Remove screws securing intermediate guide to door.
  4.  
  5. Remove the intermediate guide.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Common front seat belt location and mounting for most sedans and wagons

  1. Disconnect electrical connectors.
  2.  
  3. Unfasten the nut securing the lap retractor.
  4.  
  5. Remove the lap retractor.
  6.  
  7. Unfasten the nut and screw securing the shoulder retractor.
  8.  
  9. Remove the shoulder retractor.
  10.  
  11. Remove or lower window as necessary.
  12.  
  13. Remove the cover, nut and spacer from D-ring and remove the D-ring.
  14.  

To install:
  1. Install the D-ring, and tighten the bolt to 21 ft. lbs. (28 Nm).
  2.  
  3. Reposition and install the D-ring covers.
  4.  
  5. Secure the shoulder retractor, then tighten to 31 ft. lbs. (42 Nm).
  6.  
  7. Install the lap retractor, then tighten to 31 ft. lbs. (42 Nm).
  8.  
  9. Connect the electrical connectors to the retractors.
  10.  
  11. Secure the intermediate guide and tighten to 44 inch lbs. (5 Nm).
  12.  
  13. Install the door trim panels.
  14.  

 
label.common.footer.alt.autozoneLogo