GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Camshaft Sensor

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the serpentine drive belt.
  4.  
  5. Remove the power steering pump assembly.
  6.  
  7. Disconnect the electrical harness attached to the camshaft sensor.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Disconnect the electrical harness attached to the camshaft sensor

  1. Unfasten the bolt attaching the sensor, then remove the sensor.
  2.  

To install:
  1. Connect the camshaft sensor with the mounting bolt, then tighten the bolt to 8 ft. lbs. (10 Nm).
  2.  
  3. Attach the electrical harness to the sensor.
  4.  
  5. Install the power steering pump.
  6.  
  7. Install the serpentine drive belt, then connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo