GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

Throttle Position Sensor (TPS)

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Unfasten the TPS electrical connector.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: After unfastening the electrical connection on the TPS, remove the mounting screws

  1. Remove the 2 mounting screws.
  2.  
  3. Remove the TPS and, if equipped, TPS seal from the throttle body.
  4.  

To install:
  1. Place the TPS in position. Align the TPS lever with the TPS drive lever on the throttle body.
  2.  
  3. Install the 2 TPS mounting screws.
  4.  
  5. Fasten the electrical connector.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo