GM Chevy Mid-Size Cars 1964-1988 Repair Guide

Disc Brakes

Print

Instead of the traditional expanding brakes that press outward against a circular drum, disc brake systems utilize a disc (rotor) with brake pads positioned on either side of it. Braking is achieved in a manner similar to the way many bicycle brake work, by squeezing a spinning disc between two pads. The disc (rotor) is a casting with cooling fins between the two braking surfaces. This enables air to circulate between the braking surfaces making them less sensitive to heat buildup and more resistant to fade. Dirt and water do not affect braking action since contaminants are thrown off by the centrifugal action of the rotor or scraped off by the pads. Also, the equal clamping action of the two brake pads tends to ensure uniform, straight line stops. Disc brakes are inherently self-adjusting. There are three general types of disc brake systems:

  1. A fixed caliper.
  2.  
  3. A floating caliper.
  4.  
  5. A sliding caliper.
  6.  

The fixed caliper design uses two pistons mounted on either side of the rotor (in each side of the caliper). The caliper is mounted rigidly and does not move.

The sliding and floating designs are quite similar. In fact, these two types are often lumped together. In both designs, the pad on the inside of the rotor is moved into contact with the rotor by hydraulic force. The caliper, which is not held in a fixed position, moves slightly, bringing the outside pad into contact with the rotor. There are various methods of attaching floating calipers. Some pivot at the bottom or top, and some slide on mounting bolts. In any event, the end result is the same.

All the vehicles covered in this guide employ the sliding caliper design.

 
label.common.footer.alt.autozoneLogo