GM Chevy Mid-Size Cars 1964-1988 Repair Guide

Oil Pressure Switch

Print

REPLACEMENT



See Figure 1

The oil pressure switch is mounted to the top rear of the engine.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the electrical connector from the switch.
  4.  
  5. Remove the oil pressure switch.
  6.  

To install:
  1. Install the switch to the engine.
  2.  
  3. Engage the switch electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: The oil pressure switch is mounted to the top rear of the engine, near the distributor

 
label.common.footer.alt.autozoneLogo