GM Chevy Mid-Size Cars 1964-1988 Repair Guide

Stabilizer Bar

Print

REMOVAL & INSTALLATION



  1. Raise and support the rear of the vehicle safely using jackstands under the frame or axle.
  2.  
  3. Remove the stabilizer bar-to-lower control arm bolts, then remove the stabilizer bar from the vehicle.
  4.  

To install:
  1. Position the stabilizer bar, then install the mounting fasteners and tighten to 35 ft. lbs. (47 Nm).
  2.  
  3. Remove the jackstands and carefully lower the vehicle.
  4.  

 
label.common.footer.alt.autozoneLogo