GM Corsica/Beretta 1988-1996 Repair Guide

ABS Hydraulic Modulator Bleeder Valves

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the bleeder valve or valves by unscrewing them from the master cylinder/hydraulic modulator assembly.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: There are 2 bleeder valves threaded into the master cylinder/hydraulic modulator assembly

To install:
  1. Install the bleeder valve and tighten to 65 inch lbs. (7 Nm).
  2.  
  3. Connect the negative battery cable.
  4.  

 
label.common.footer.alt.autozoneLogo