GM Corsica/Beretta 1988-1996 Repair Guide

Electrical Connectors

Print

Some ABS-VI components are equipped with electrical connectors using a Connector Position Assurance (CPA) lock.

  1. Remove the lock before separating the electrical connectors.
  2.  
  3. Be careful not to damage the locking pin during removal.
  4.  

  1. Make sure that the rubber connector seal is in place on the connector before and after connection.
  2.  
  3. Always install the lock after the connection is made.
  4.  

 
label.common.footer.alt.autozoneLogo