GM Corsica/Beretta 1988-1996 Repair Guide

Front Wheel Speed Sensor

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Detach the front sensor electrical connector.
  6.  
  7. Remove the Torx® bolt.
  8.  
  9. Remove the front wheel speed sensor.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Location of the front wheel speed sensor

To install:
  1. Install the front wheel speed sensor on the mounting bracket.
  2.  

Ensure the front wheel speed sensor is properly aligned and lays flat against the bracket bosses.

  1. Install the Torx® bolt and tighten to 106 inch lbs. (12 Nm).
  2.  
  3. Attach the front sensor electrical connector.
  4.  
  5. Lower the vehicle.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo