The Anti-Lock Brake System (ABS), used on 1992-96 vehicles, has been designed to improve the controllability and steerability of a vehicle during braking that would cause one or more wheels to lock. ABS-VI accomplishes this objective by controlling the hydraulic pressure applied to each wheel brake.
BASIC KNOWLEDGE REQUIRED
Before using this section, it is important that you have a basic knowledge of the following items. Without this basic knowledge, it will be difficult to use the diagnostic procedures contained in this section.Basic Electrical Circuits
- You should understand the basic theory of electricity and know the meaning of voltage, current (amps) and resistance (ohms). You should understand what happens in a circuit with an open or shorted wire. You should be able to read and understand a wiring diagram.Use Of Circuit Testing Tools
- You should know how to use a test light and how to use jumper wires to bypass components to test circuits. You should be familiar with the High Impedance Multimeter (DVM) J 34029-A. You should be able to measure voltage, resistance and current and be familiar with the meter controls and how to use them correctly.
Failure to observe the following precautions may result in system damage.