GM Corsica/Beretta 1988-1996 Repair Guide

Stabilizer Link

Print

REMOVAL & INSTALLATION



  1. Raise and safely support the vehicle, allowing the front lower control arms to hang free.
  2.  
  3. Remove the front wheel and tire assemblies.
  4.  
  5. Unfasten the nut attaching the stabilizer link to the stabilizer shaft.
  6.  
  7. On vehicles equipped with the base suspension system, remove the bolt, insulators, spacer and washers.
  8.  
  9. On vehicles equipped with the direct acting stabilizer system, remove the nut attaching the stabilizer link to the strut bracket.
  10.  
  11. Remove the stabilizer link from the vehicle.
  12.  

To install:
  1. For vehicles equipped with the base suspension system, install the bolt, insulators, spacer and washers.
  2.  
  3. Install the nut securing the stabilizer link to the shaft. Tighten the nut to 15-20 ft. lbs. (20-30 Nm) for vehicles with the base suspension system. For vehicles with direct acting suspension, tighten the nut to 70 ft. lbs. (95 Nm).
  4.  
  5. For vehicles with the direct acting stabilizer system, install the nuts attaching the stabilizer link to the strut bracket and tighten to 70 ft. lbs. (95 Nm).
  6.  
  7. Install the front wheel and tire assemblies, then carefully lower the vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo