GM Corsica/Beretta 1988-1996 Repair Guide

Control Cables

Print

REMOVAL & INSTALLATION



1988-90 Vehicles

See Figure 1

  1. Disconnect the negative battery cable..
  2.  
  3. Remove the glove box and the right side sound insulator.
  4.  
  5. Disconnect the cables from the heater module.
  6.  
  7. Remove the heater control assembly trim plate.
  8.  
  9. Disconnect the cables from the heater control assembly.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the heater control panel and control cables - 1990 vehicles without A/C shown

To install:
  1. Attach the cables to the heater control assembly.
  2.  
  3. Install the heater control assembly.
  4.  
  5. Install the heater control trim plate.
  6.  
  7. Connect the cables to the heater module.
  8.  
  9. Install the glove compartment and right sound insulator.
  10.  

 
label.common.footer.alt.autozoneLogo