GM Corsica/Beretta 1988-1996 Repair Guide

Door Locks

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Remove the lock module assembly.
  2.  
  3. Disconnect all rods attached to the lock.
  4.  
  5. Remove the lock assembly from the module.
  6.  

A new service lock will have a block-out plug installed. Do not operate the lock or remove the plug until the lock is installed and the rod is connected to the lock.

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the cover and lock assembly - Beretta



Click image to see an enlarged view

Fig. Fig. 2: Exploded view of the front door lock and related components - Corsica



Click image to see an enlarged view

Fig. Fig. 3: Exploded view of the rear door lock rod and related components - Corsica

To install:
  1. Attach the lock assembly to the module.
  2.  
  3. Connect all rods that were removed.
  4.  
  5. Install the lock module assembly.
  6.  

 
label.common.footer.alt.autozoneLogo