GM Corvette 1963-1982 Repair Guide

Flywheel and Ring Gear

Print

REMOVAL & INSTALLATION



The ring gear is an integral part of the flywheel and is not replaceable.

  1. Remove the transmission.
  2.  
  3. Remove the six bolts attaching the flywheel to the crankshaft flange. Remove the flywheel.
  4.  
  5. Inspect the flywheel for cracks, and inspect the ring gear for burrs or worn teeth. Replace the flywheel if any damage is apparent. Remove burrs with a mill file.
  6.  
  7. Install the flywheel. The flywheel will only attach to the crankshaft in one position, as the bolt holes are unevenly spaced. Install the bolts and tighten to specification. Tighten the bolts in crisscross pattern.
  8.  

 
label.common.footer.alt.autozoneLogo