GM Corvette 1963-1982 Repair Guide

Stabilizer Bar

Print

REMOVAL & INSTALLATION



See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Detach the stabilizer bar (shaft) from both torque arms, remove the brackets from the frame, then remove the bar from the vehicle

  1. Raise the vehicle and support it safely.
  2.  
  3. Remove spare tire and tire carrier.
  4.  
  5. Disconnect stabilizer bar from knuckles.
  6.  
  7. Remove stabilizer bar bushing retainers, bushings and bar from the vehicle.
  8.  
  9. To install, reverse the removal procedures and torque all bolts to specifications.
  10.  

 
label.common.footer.alt.autozoneLogo