GM Corvette 1984-1996 Repair Guide

Chassis Greasing

Print

See Figures 1, 2, 3, 4, 5, 6, 7 and 8

Chassis lubrication can be performed with a pressurized grease gun or by using a hand-operated grease gun. Wipe the grease fittings clean before greasing in order to prevent the possibility of forcing any dirt into the component.



Click image to see an enlarged view

Fig. Fig. 1: Maintenance locations and chassis lubrication points-1984-89 5.7L (VIN 8) engine



Click image to see an enlarged view

Fig. Fig. 2: Lower ball joint grease fitting location



Click image to see an enlarged view

Fig. Fig. 3: Steering linkage (outer tie rod end) grease fitting location



Click image to see an enlarged view

Fig. Fig. 4: Rear axle tie rod end grease fitting location



Click image to see an enlarged view

Fig. Fig. 5: Maintenance and chassis lubrication points-1990-91 5.7L (VIN 8) engine



Click image to see an enlarged view

Fig. Fig. 6: Maintenance and lubrication fitting locations-5.7L (VIN J) engine



Click image to see an enlarged view

Fig. Fig. 7: Maintenance and lubrication fitting locations-5.7L (VIN P) engine



Click image to see an enlarged view

Fig. Fig. 8: Maintenance and lubrication fitting locations-5.7L (VIN 5) engine

 
label.common.footer.alt.autozoneLogo