GM Corvette 1984-1996 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION



1984-90 Vehicles

See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster, as outlined earlier in this section.
  4.  
  5. Unfasten the screws on the right side of the switch.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the headlight, dimmer and accessory switch mounting-1990 vehicle shown

  1. Remove the switch trim plate screws.
  2.  
  3. Pull the switch partially away from the dash, unplug the connectors, then remove the switch from the vehicle.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

1991-96 Vehicles

See Figure 2

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the cluster trim plate screws.
  4.  
  5. Reposition the trim plate in order to get to the screws on the right side of the switch.
  6.  
  7. Remove the screws from the right side of the switch.
  8.  



Click image to see an enlarged view

Fig. Fig. 2: Exploded view of the headlight and accessory switch-1996 vehicle shown

  1. Remove the switch trim plate, screws and trim plate.
  2.  
  3. Pull the switch partially away from the dash, unplug the connectors, then remove the switch from the vehicle.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo