GM Corvette 1984-1996 Repair Guide

Maintenance Lights

Print

RESETTING



1990-91 Vehicles

The CHANGE OIL monitor light is on the left side of the instrument cluster. When changing the oil, reset the engine oil lift monitor whether the CHANGE OIL light came on or not. Reset the monitor as follows:

  1. Turn the ignition key to the ON position, but do not start the engine.
  2.  
  3. Press the ENG MET button on the trip monitor and release. Press the button again within 5 seconds.
  4.  
  5. Within 5 seconds of pressing the button the second time, press and hold the RANGE button on the trip monitor. The CHANGE OIL light will flash.
  6.  
  7. Hold the RANGE button until the CHANGE OIL light stops flashing and extinguishes. The monitor is reset at this point. Repeat this procedure if the light does not go out.
  8.  

1992-96 Vehicles
  1. Turn the ignition key to the ON position, but do not start the engine.
  2.  
  3. Press the ENG MET button on the trip monitor and release. Press the button again within 5 seconds.
  4.  
  5. Within 5 seconds of pressing the button the second time, press and hold the GAUGES button on the trip monitor. The CHANGE OIL light will flash.
  6.  
  7. Hold the GAUGES button until the CHANGE OIL light stops flashing and extinguishes. The monitor is reset at this point. Repeat this procedure if the light does not go out.
  8.  

 
label.common.footer.alt.autozoneLogo