GM Corvette 1984-1996 Repair Guide

Windshield Washer Motor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Detach the water motor electrical connector.
  4.  
  5. Place a suitable drain pan under the vehicle. Drain the washer reservoir.
  6.  
  7. Remove the washer pump from the reservoir using suitable pliers.
  8.  
  9. Disconnect the washer hose from the pump.
  10.  

To install:
  1. Connect the washer hose to the pump.
  2.  
  3. Place the washer pump into the reservoir using a pair of pliers. Make sure the pump is pushed in all the way into the reservoir seal.
  4.  
  5. Attach the washer motor electrical connector.
  6.  
  7. Refill the windshield washer reservoir.
  8.  
  9. Connect the negative battery cable, then check for proper washer motor operation.
  10.  

 
label.common.footer.alt.autozoneLogo