GM Cutlass RWD 1970-1987 Repair Guide

Brake Backing Plate

Print

REMOVAL & INSTALLATION



  1. Remove the wheel and brake drum.
  2.  
  3. Remove the brake hardware and linings.
  4.  
  5. Remove the axle shaft.
  6.  
  7. Remove the brake line from the wheel cylinder and the wheel cylinder from the backing plate.
  8.  
  9. Disconnect the parking brake cable from the backing plate.
  10.  
  11. Remove the backing plate attaching bolts and remove the backing plate.
  12.  
  13. Installation is the reverse of removal. Torque the backing plate attaching bolts to 40 ft. lbs. (54 Nm).
  14.  

 
label.common.footer.alt.autozoneLogo