GM Cutlass RWD 1970-1987 Repair Guide

Headlight Switch

Print

REMOVAL & INSTALLATION



1970-77
  1. Disconnect the negative battery cable.
  2.  
  3. On A/C equipped models remove the Left hand control panel.
  4.  
  5. On models without A/C remove the steering column trim cover.
  6.  
  7. Disconnect the multiple connector from the switch.
  8.  
  9. Pull the switch knob to the last notch and depress the spring loaded latch button on top of the switch while pulling the knob and rod out of the switch.
  10.  
  11. Remove the escutcheon and the switch.
  12.  

To install:
  1. Secure the multiple connector to the switch
  2.  
  3. Install the new switch and the escutcheon.
  4.  
  5. Connect the negative battery cable.
  6.  

1978-87
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the cluster pad assembly.
  4.  
  5. Remove the two headlamp switch retaining screws.
  6.  
  7. Pull the switch away from the panel adapter to remove.
  8.  

 
label.common.footer.alt.autozoneLogo