GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Brake Pedal

Print



Click image to see an enlarged view

Fig. Fig. 1 Brake pedal assembly

REMOVAL & INSTALLATION



  1. Follow all precautions in and disable the Air Bag system. Remove the left side sound insulator.
  2.  
  3. Remove the stoplight switch assembly.
  4.  
  5. Detach the brake pushrod from the brake pedal.
  6.  
  7. Remove the retaining/pivot bolt. This is a long bolt that passes though several spacers and bushing retained by a nut. This is difficult to get to; a ratchet set and offset wrench may help. Take care not to damage wiring with the tools.
  8.  
  9. Clean and lubricate all pivoting parts when assembling. Install replacement assembly and torque the pedal bolt to 15 ft. lbs. (21 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo