GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Vehicle Speed Sensor

Print



Click image to see an enlarged view

Fig. Fig. 1 Vehicle speed sensor is located on transaxle

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the retaining bolt from the sensor, located on the transaxle extension.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Remove the speed sensor from the transaxle.
  8.  

To install:

  1. Replace the O-ring.
  2.  
  3. Install the sensor.
  4.  
  5. Torque the retaining bolt to 97 inch lbs. (11 Nm).
  6.  
  7. Connect the connector.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo