GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Ignition Coil Pack (Type 1)

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the spark plug wires from the pack.
  4.  
  5. Remove the retaining screws securing the coil to the ignition module.
  6.  
  7. Remove the coil assembly. Inspect the module terminals.
  8.  

To install:

  1. Fit the coil pack assembly to the ignition module.
  2.  
  3. Install the retaining screws and torque to 40 inch lbs. (4-5 Nm).
  4.  
  5. Install the spark plug wires.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo