GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Ignition Coil (Type II)

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the spark plug wires.
  4.  
  5. Remove the 2 retaining screws securing the coil to the ignition module.
  6.  
  7. Remove the coil assembly. Inspect the module terminals.
  8.  

To install:

  1. Fit the coil assembly to the ignition module.
  2.  
  3. Install the retaining screws and torque to 40 inch lbs. (4-5 Nm).
  4.  
  5. Install the spark plug wires.
  6.  
  7. Reconnect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo