GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Radio Assembly and Compact Disc Player

Print

REMOVAL & INSTALLATION



1990 Ninety-Eight


Click image to see an enlarged view

Fig. Fig. 1 Radio assembly and related parts-1990 Ninety-Eight



Click image to see an enlarged view

Fig. Fig. 2 Center trim plate-1990 Ninety-Eight



Click image to see an enlarged view

Fig. Fig. 3 Lower trim plate-1990 Ninety-Eight

  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Remove the center trim plate screws and pull off the trim plate.
  4.  
  5. Remove all attaching screws and remove the entire lower trim piece.
  6.  
  7. Remove the radio mounting screws.
  8.  
  9. Slide the radio out, disconnect the wiring and antenna cable, then remove. Transfer the mounting brackets if necessary.
  10.  

To install:

  1. Position the radio, connect the antenna and wiring, and secure with the screws.
  2.  
  3. Install the lower trim piece.
  4.  
  5. Install the center trim plate.
  6.  
  7. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  8.  
  9. Check all functions of the radio for proper operation.
  10.  

1990 Electra and Park Avenue



Click image to see an enlarged view

Fig. Fig. 4 Radio and related parts-1990 Electra/Park Avenue

  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Carefully pry out the outer lower accessory trim plate.
  4.  
  5. Remove the lower accessory trim plate.
  6.  
  7. Remove the radio mounting screws.
  8.  
  9. Slide the radio out, disconnect the wiring and antenna cable, then remove. Transfer the mounting brackets if necessary.
  10.  

To install:

  1. Position the radio, connect the antenna and wiring, and secure with the screws.
  2.  
  3. Install the trim plates.
  4.  
  5. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  6.  
  7. Check all functions of the radio for proper operation.
  8.  

1991-93 Ninety-Eight


Click image to see an enlarged view

Fig. Fig. 5 Instrument panel assembly-1991-93 Ninety-Eight



Click image to see an enlarged view

Fig. Fig. 6 Radio and CD player details-1991-93 Ninety-Eight

Radio assembly
  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Remove the instrument cluster trim plate.
  4.  
  5. Remove the radio mounting screws.
  6.  
  7. Slide the radio out, disconnect the wiring and antenna cable, then remove. Transfer the mounting brackets if necessary.
  8.  

To install:

  1. Position the radio, connect the antenna and wiring, and secure with the screws.
  2.  
  3. Install the trim plates.
  4.  
  5. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  6.  
  7. Check all functions of the radio for proper operation.
  8.  

Compact disc player
  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Remove the center trim plate.
  4.  
  5. Remove the sound insulators.
  6.  
  7. Remove the CD player mounting screws (2 facing forward, 2 facing upward).
  8.  
  9. Slide the player out, disconnect the wiring, then remove. Transfer the mounting brackets if necessary.
  10.  

To install:

  1. Position the player, connect the wiring, and secure with the screws.
  2.  
  3. Install the sound insulators and center trim plates.
  4.  
  5. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  6.  
  7. Check all functions of the CD player for proper operation.
  8.  

1991-93 Park Avenue
  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Remove the instrument panel lower trim plate and air vent deflectors.
  4.  
  5. Remove the glove box and accessory trim plate.
  6.  
  7. Remove the radio mounting screws.
  8.  
  9. Slide the radio out, disconnect the wiring and antenna cable, then remove. Transfer the mounting brackets if necessary.
  10.  

To install:

  1. Position the radio, connect the antenna and wiring, and secure with the screws.
  2.  
  3. Install the trim plate and glove box.
  4.  
  5. Install the air vent deflectors and instrument panel lower trim plate.
  6.  
  7. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  8.  
  9. Check all functions of the radio for proper operation.
  10.  

 
label.common.footer.alt.autozoneLogo