GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Fenders

Print



Click image to see an enlarged view

Fig. Fig. 1 Wheel opening moulding



Click image to see an enlarged view

Fig. Fig. 2 Wheelhouse panel



Click image to see an enlarged view

Fig. Fig. 3 Fender attaching points

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove all wheel opening moulding screws and remove the moulding.
  4.  
  5. Remove all wheelhousing panel screws and remove the panel.
  6.  
  7. Remove all related lamp assemblies.
  8.  
  9. Remove 2 nuts at front of the fender.
  10.  
  11. Remove 2 facia-to-fender screws and loosen the bumper from around the fender.
  12.  
  13. Remove 2 bolts at the bottom of the fender.
  14.  
  15. Remove the 2 bolts from the center bracket.
  16.  
  17. Remove the top nut. Take note of shim locations and remove.
  18.  
  19. Remove 3 screws at the top of the fender.
  20.  
  21. Remove the fender.
  22.  

To install:

  1. Remove the fender and secure with 3 screws at the top of the fender.
  2.  
  3. Install original shims and install the top nut.
  4.  
  5. Install the 2 bolts from the center bracket.
  6.  
  7. Install 2 bolts at the bottom of the fender.
  8.  
  9. Position the bumper and install 2 facia-to-fender screws.
  10.  
  11. Install 2 nuts at front of the fender. Add or subtract shims where required to align fender.
  12.  
  13. Install all related lamp assemblies.
  14.  
  15. Install the wheelhousing panel.
  16.  
  17. Install the wheel opening moulding.
  18.  
  19. Connect the negative battery cable.
  20.  

 
label.common.footer.alt.autozoneLogo